Using high-quality imported environmentally friendly raw materials, with low free TD content, fresh and non irritating odor, safe and environmentally friendly. Formaldehyde purification technology has overcome multiple technological challenges by applying it to wood coatings. It has a strong degradation effect on formaldehyde, the biggest indoor air pollution killer, and protects the health of the whole family.
Product features:
● High transparency
● Can provide color matching services
● Good resistance to yellowing and leveling
Good fullness and color retention
The paint film is clear and the topcoat has a good hand feel
Construction method:
This product can be applied by brush coating, roller coating, or airless spraying
Purpose:
Suitable for interior decoration, furniture, and surface coating and protection of various bamboo and wood products.
usage method:
When mixing, first stir the main paint thoroughly and mix it evenly with the curing agent and diluent according to the construction mix proportion. Filter it through a 200 mesh filter and let it stand for 15 minutes until it is fully dissolved before use.
Paint consumption:
Primer: 10-12mKg/single coat (main agent)
Topcoat: 12-14mKg/single coat (main agent)
The actual area varies depending on the construction method, surface roughness, and construction environment
Drying time (temperature 25 ° C/relative humidity 70%):
Dry for 0.5 hours, dry for 24 hours. In humid weather or when the temperature is too low, the time should be extended appropriately.
Repainting time:
The actual drying time and recoating time of 6 hours may vary depending on temperature or relative humidity.
Construction methods and techniques:
Brush coating or spray coating (with an appropriate increase in diluent ratio). Before use, please strictly mix according to the proportion and stir thoroughly. After preparing the paint, please let it stand for about 15 minutes. After the bubbles disappear, it is recommended to filter the topcoat with a 200-300 mesh filter cloth and the primer with an 80-100 mesh filter cloth before use; The recommended construction sequence is three bases and two sides, which can also be adjusted according to actual needs, such as two bases and three sides; It is recommended to use the prepared paint within 4 hours; Used tools should be cleaned immediately with diluent after use.
matters needing attention:
The surface of the coating must be dry, polished clean, free of stains, and the environment must be kept free from pollution. Construction should be avoided in low temperature (≤ 5 ℃) and high humidity (80% ≥) environments, as well as when the substrate is too humid (moisture content ≥ 14%);
Paint and curing agents can react with water and moisture. If they cannot be used up in one go after opening, they must be resealed with double care;
Please make sure to use our company’s products in conjunction and strictly follow the process requirements for construction, otherwise the desired effect may not be achieved. If the construction is not carried out according to the process requirements, or if our company’s products are not used in conjunction, or if there are quality problems caused by the substrate and construction environment, our company will not be held responsible.
